How to replace the back on ASUS ROG 3?

How to replace the back on ASUS ROG 3?

The Asus ROG Phone 3, smartphone that was launched in July 2020 with a focus on gaming performance and features. One of its notable features is its glass back cover, which is integrated with an aluminum frame. The back cover not only gives the phone a premium look, but also protects the internal components, secures the battery, and provides structural stability. However, the back cover also poses some challenges for repairability, as it may be prone to damage, void the warranty, or expose the phone to dust and moisture..


The Asus ROG Phone 3's back cover, a gaming smartphone that was released in 2020 with a sleek design and advanced features. The article analyzes various factors that influence the repair process, such as the device's design and construction, the manufacturer's official guidelines, the availability of replacement parts, the repair costs and technical expertise required, and the insights from experts and technicians. The article also compares the benefits and drawbacks of repairing versus replacing the back cover, and provides recommendations for trusted repair services. The article ends by suggesting the reader to make a careful decision based on their personal preferences, budget, and the availability of reliable repair services.

๐Ÿ‘ฃStep-by-Step Guide: How to Replace the Back Cover on an ASUS ROG 3 Smartphone

Replacing the back cover on your ASUS ROG 3 smartphone can enhance its durability and give you the opportunity to customize its appearance. This detailed guide will take you through the process with clear instructions and accompanying images to ensure a successful replacement. It is important to follow each step carefully and take necessary precautions to avoid any potential damage. Additionally, we will address common troubleshooting issues that may arise during the replacement.

๐Ÿ”งMaterials Needed

1. Replacement back cover for ASUS ROG 3
2. Small suction cup or pry tool
3. Precision screwdriver set
4. Plastic opening tool or guitar pick
5. Tweezers
6. Adhesive (optional, for added security)

Step 1: Power off and prepare your workspace
Ensure your smartphone is powered off to avoid any potential damage. Find a clean, well-lit workspace where you can easily perform the replacement.

Step 2: Locate and remove the SIM card tray
Using a SIM ejector tool, carefully insert it into the small hole located on the side of the smartphone. Gently apply pressure until the tray pops out. Remove the SIM card tray and set it aside.

Step 3: Remove the screws securing the back cover
Using a precision screwdriver, carefully remove the screws located at the bottom and sides of the smartphone. Place the screws in a small container to avoid losing them.

Step 4: Apply suction cup or pry tool to lift the back cover
Place a small suction cup on the back cover near the USB-C port or use a pry tool to lift the corner of the back cover. Gently apply pressure and create a small gap between the back cover and the frame of the phone.

Step 5: Carefully detach the back cover
Insert a plastic opening tool or a guitar pick into the gap created in the previous step. Slowly glide the tool along the edges of the back cover, releasing the clips that hold it in place. Take your time to avoid undue force or damage to the phone.

Step 6: Disconnect the rear camera connector
Locate the rear camera connector cable on the motherboard and use a pair of tweezers to gently disconnect it. Ensure you pull straight up to prevent any damage to the cable or connector.

Step 7: Remove the old back cover
Once the rear camera connector is disconnected, you can carefully lift the old back cover off the smartphone and set it aside.

Step 8: Install the new back cover
Align the new back cover with the smartphone's frame, ensuring all the clips fit into their respective slots. Gently press down on the back cover to secure it in place.

Step 9: Reconnect the rear camera connector
Carefully align the rear camera connector with its socket on the motherboard. Use your tweezers to gently push it into place until you feel it snap into position.

Step 10: Secure the back cover with the screws
Take the screws you set aside earlier and use the precision screwdriver to screw them back into their original positions. Ensure they are tightened securely but avoid excessive force.

Step 11: Reinstall the SIM card tray
Insert the SIM card tray back into its slot until it fits snugly.

Step 12: Power on your ASUS ROG 3
Press and hold the power button until the smartphone vibrates and the ASUS logo appears on the screen. Your phone should now power on as usual.

โš™๏ธTroubleshooting

- If the back cover does not fit properly, double-check that all the clips are aligned. Remove it and reposition it if necessary.
- If the rear camera is not functioning properly after reassembly, ensure the connector is securely attached. Disconnect and reconnect the cable if needed.
- If any screws are not tightening properly, verify they are in the correct locations and try again, ensuring not to overtighten.

๐Ÿ“ŒBenefits of Replacing the Back Cover

1. Enhanced Durability: A new back cover can provide added protection against scratches, impacts, and dust.
2. Personal Customization: Replacing the back cover allows you to change the appearance of your smartphone to match your personal style or preferences.
3. Resale Value: By preserving the original back cover through replacement, you can retain the smartphone's original aesthetics for higher resale value.

By following this detailed step-by-step guide, you should now be able to replace the back cover on your ASUS ROG 3 smartphone. Remember to take precautions, follow each step carefully, and troubleshoot any issues that may arise. Enjoy the enhanced durability and personal customization options provided by your new back cover!

asus rog 3 screen replacement price
Asus rog phone 3 back replacement price
rog phone 3 repair near me
Asus rog phone 3 back replacement cost
asus rog phone 3 motherboard
rog phone 3 screen size
rog phone 3 teardown

Back to blog