The OnePlus 6T, smartphone that announce on October 2018 and was launched in November 2018 features a sturdy rear camera outer glass that protects its dual-camera setup. If the outer glass gets damaged, it can be replaced by carefully heating the adhesive and removing the broken glass before installing a new one. This ensures the camera remains protected and functional.
The rear main camera of the OnePlus 6T includes a 16MP primary sensor with an f/1.7 aperture, providing excellent low-light performance and sharp image quality. It also features Optical Image Stabilization (OIS) and Phase Detection Autofocus (PDAF) to enhance focus speed and reduce blur. Additionally, the secondary 20MP sensor aids in digital zoom and depth effects. The camera can record 4K videos at 30/60fps, offering versatility for various shooting conditions.
📌Complete Guide to Safely Remove Broken Camera Outer Glass on OnePlus 6T
Accidents happen, and sometimes the camera outer glass on your OnePlus 6T may get broken. Instead of replacing the entire camera, you can opt to replace just the outer glass to save time and money. However, this process requires precision and caution to avoid causing further damage to the device. This step-by-step guide will walk you through the process safely and effectively removing the broken camera outer glass on your OnePlus 6T.
🛠️Tools Needed
1. Heat gun or hair dryer
2. Suction cup
3. Plastic pry tool
4. Tweezers
5. Adhesive remover
6. Microfiber cloth
7. Replacement camera outer glass
Step 1: Prepare the OnePlus 6T
Power off the device and remove the SIM card tray. This will prevent any damage to the internal components during the repair process.
Step 2: Apply Heat to Loosen the Adhesive
Use a heat gun or hair dryer to gently heat the broken camera outer glass. Be careful not to overheat the device, as excessive heat can damage the internal components. Heat the glass for 1-2 minutes until it is warm to the touch.
Step 3: Use a Suction Cup to Lift the Glass
Place a suction cup near the broken camera outer glass and apply pressure to create a seal. Slowly pull on the suction cup to lift the glass away from the device. If the glass does not lift easily, apply more heat and try again.
Step 4: Remove the Broken Glass
Once the glass is lifted, use a plastic pry tool to gently pry the glass away from the device. Be careful not to apply too much force, as this can damage the camera module underneath.
Step 5: Clean the Camera Module
Use tweezers to remove any remaining glass shards from the camera module. You can also use adhesive remover and a microfiber cloth to clean any residue left behind.
Step 6: Install the Replacement Camera Outer Glass
Apply adhesive to the replacement camera outer glass and carefully place it onto the camera module. Press down gently to ensure a secure bond.
Step 7: Test the Camera
Power on the OnePlus 6T and test the camera to ensure it is functioning properly. If there are any issues, double-check the installation of the replacement glass and make any necessary adjustments.
💡Troubleshooting Tips
- If the glass is not lifting, apply more heat and try using a plastic pry tool to loosen the adhesive.
- Take your time and be patient throughout the process to avoid damaging the device.
- If you encounter any difficulties, consider seeking professional help to avoid further damage.
✍️Conclusion
By following these steps and safety precautions, you can successfully remove the broken camera outer glass on your OnePlus 6T. Remember to always prioritize safety and caution when undertaking device repairs.
How to remove broken camera outer glass on oneplus 6t youtube
Phone camera glass repair cost
How to remove broken camera outer glass on oneplus 6t after
Oneplus 6t camera outer glass replacement
Oneplus 6t camera outer glass replacement price
Oneplus 6t camera outer glass replacement australia
Phone camera glass replacement
Broken glass on phone camera
Phone camera repair near me
Phone camera broken
Camera screen cracked
